Question about sensor cleaning

[brad94sc]

I am hoping that one of the more seasoned pros here can offer some advice on how to deal with a very dirty sensor.

I have a Canon T1i and after using a bulb blower the sensor has a lot of dust on it, to the point where any images with a smaller aperture is completely useless.

is there any place in the valley that can clean a sensor? I must admit I am a little apprehensive about tackling this myself as I have read some horror stories about damaged cameras and expensive repairs.

Thanks in advance for any advice!

[dpeppar]

I had a similar problem and was told that I needed to send it east for the cleaning. So I bought a cleaning kit from London Drugs and used the two part swab system of a wet application and then a dry one. Very easy and worked great.

DaveP

[kenpossum]

If you need to go commercial, try Lens and Shutter in Abbotsford. I would try Dave's suggestion first.

[brad94sc]

Thanks for the input and advice!

I'm off to London Drugs to see what I can find, I figure the worst that can happen is I end up with a new camera (if things go horribly wrong!)